DIY Love Sign

Chloe's on a room-cleaning spree... yippee! And part of her new clean look was the desire for a new mantel design, including a love sign. You've seen our past room designs for her, but she's seriously decluttering - again - and wants a look that is simple & elegant, with a little bit of funky. Maybe it's the fall weather and there's such a thing as "fall cleaning," but I asked no questions and she's on a roll!

There are no big changes in the air, just simplifying a bit, but for the mantel, she wanted to replace her monogram message board with a love sign by PocketfulofDreamsUK's but we didn't want to spend $400. So, it was time to be inspired and DIY! We were surprised how easy this project turned out to be, and are already thinking of other projects similar to her new love sign.

Supplies:

• wooden letters *
• gold discs - we used 40 mm sequins
• gold thumb tacks
• gold Krylon paint

Steps:

1. Sand and prime your wooden letters. Then spray them, making sure to cover sides as well.

2. Starting at bottom, cover letters with discs and thumb tacks. Push thumb tacks 1/2 way the top hole only in so discs can move freely side to side (movement gives it a 3-dimensional quality that makes it more interesting).

3. Add a new row directly above the bottom row, covering the thumbtacks. Where possible, keep the columns and rows straight.

Can you believe - that's it! The only tedious part is that it takes some time to push the thumb tacks in (my thumbs actually got a little sore, so I used a thimble). Other than that, this is a very simple project. Consider it a weekend undertaking and catch up on some movies, football, or a tv series. I have a few I can recommend - any you are liking lately?

* {update 2/19: it seems the wood we used may have changed and it's become almost impossible to push a thumbtack into the wooden letters! If you can't test a thumbtack discreetly before purchasing (in a spot that would not harm it for another purchaser) then we suggest using the exact same idea on CARDBOARD letters. The shape is plainer, but the insertion is easy!}

IF YOU ENJOY THIS: check out our Disco Love Sign & Glitter Lollipops

Lilly Pulitzer Pumpkins

Orange and black are so typical for a Happy Halloween, Is it possible... can we actually make it pink and green?

If you like Lilly Pulitzer pumpkins as much as we do you can! Just follow these simple steps and soon you'll be a fan,

Grab a pumpkin (fake's fine) your fave print too, And follow along as we tell you exactly what to do!

Supplies needed:

• 1 craft pumpkin in a light color (or paint a regular craft pumpkin a light color) - don't worry this is a no carve pumpkin idea!
• Lilly Pulitzer Napkins or Lilly Pulitzer patterned paper
• Modge Podge
• Sponge Paint Brush

Take your Lilly Pulitzer napkins (or any napkins will do - just pick a favorite print!) and peel off the white backing. Ours were 3-ply, meaning there were 2 white pieces on back of the colored print.

Cut off the trim around the edge of the napkin and cut the napkin into 2" strips.

Apply a liberal coat of Modge Podge to your craft pumpkin. Then very carefully apply the strips of the napkin from the top of the pumpkin to the bottom of the pumpkin all the way around the pumpkin. Overlapping a bit is fine, but be sure not to leave any spaces between each strip.

Apply a coat of Modge Podge to the top of the napkin strips or paper strips once they have been applied and the first layer has somewhat dried. Let this layer dry and apply more to any bits that might be sticking up.

At the last minute, we decided to paint the stem metallic gold using our Martha Stewart paint, since a dull brown stem didn't do our pink and green any justice!

And voilà... you are done and have a pink & green Halloween... or a colorful Halloween in whatever patterns or Lilly Pulitzer pumpkins colors you have chosen!

Want a more tradition orange and black pumpkin.. then check out our black and white stripe pumpkin.

For more inspiration, here are cute ideas my friends have for Halloween:

---

---